Wood Handled Slotted Paper Bead Rollers
Made of stainless steel, the slotted winding pin in these paper bead rollers are 1¼" long which will enable you to make beads up to 1¼" long comfortably! You can use these beads in jewelry or crafts. You are only limited to your imagination to what paper beads you can make with these slotted winding pin paper bead rollers.
The winding pins are a tube with an open slot down one side of the pin. You may have seen other paper bead rollers on the internet with this same type of pin. I decided to offer them as well so you have a choice. I am unable to get the special slotted pins longer than what I have available here so if you want the long paper bead rollers, you will need to order the adjustable split pin paper bead rollers Here.
The 1/2 inch thick wood handles are made in a wood turning mill located just 23 miles south of my home so I am able to drive there to get them! The handles are made with solid birch wood, from Maine, within a 125 mile radius of the wood turning mill and stained a golden oak color. I order the handles in batches of 2000 pieces. The lightness of the stain varies from batch to batch and I do try to match the handles as close as possible but I am not always able to get them to match exactly.
You will find little numbers on the bottom of each wooden handled paper bead roller. They are numbered from 1 to 6. 1 Being the smallest 5/64" winding pin and 6 being the largest, 1/4" winding pin. That way you can tell them apart more easily.